How Curtain Measurements Work: A Comprehensive Guide



It is extremely important to take measurements before proceeding to order curtains. As a matter of fact, non-aesthetic appearances may occur as a result of incorrect measurements. In addition, measurements must be taken meticulously in order to close the window completely. There are a number of steps for those who wonder how to measure the curtain. That is, it would be wrong to take measurements only on the wall or only on the ceiling. It should be noted from the outset that all of them must be measured as a whole. So how exactly curtain measurements work?

Curtain measurements work in a series of phases. At first, it is important to measure the distance between the ceiling and the glass. Then you have to measure both the right and left margins. After the width measurements are completed, you need to start the height measurement. For the length, the distance to the ceiling curb must be measured. It is important to take measurements up to the radiator if any. Finally, it is useful to measure from the ceiling to the floor.



Once you know how to measure for the curtain, it’s easier for you to act. As can be seen, the entire area where the curtain will be positioned is taken into account. So it will not be correct to take measurements only on the window. In addition, ceilings, walls, radiators, or voids must be based. As a result, it is not possible for those who take measurements according to these stages to encounter any problems. On the contrary, it is possible for them to buy the curtains as they want and start assembly.

Those who take a look at curtain measurement techniques can then order and proceed to the installation stage. Afterward, the curtains are made available to customers with a suitable apparatus. Another issue that is curious here is how the curtains are assembled. You can start using the curtains in a short time by taking a look at the assembly stages. In this sense, those who learn how to measure the curtain should make markings for the product. In other words, measurement and markings are important for mounting on the ceiling or wall. Right after that;

  • The mounting apparatus should be positioned where there are markings.
  • With the help of a screwdriver or markup, you can position the apparatus in a short time.
  • Right after, you need to attach the curtain with both front and back parts.
  • By applying force, the assembly will be possible in a short time.


After measuring the curtain, the assembly steps can also be viewed. It can be mounted not only on the base and the wall but also on the cornice. Moreover, it should be noted that it is easier than the wall and ceiling. Again, thanks to the cornice apparatus, the process will be completed in a few minutes. In order to keep the curtains intact, it is recommended to apply force during attachment. In this way, it becomes more durable. Again, like measurements, it is useful to take a look at the techniques for assembly.

Those who wonder how to measure for curtains should also consider types. For tulle curtains, measurements can be made over the entire wall and ceiling. It is important to consider windows for roller blinds. At the same time, you have to measure the radiators under the windows, if any. However, according to these measurements, it is possible to design mechanisms rather than curtains. In particular, it should be mentioned that width measurements are very important for mechanisms. Correct measurements should be taken and presented to avoid problems with the mechanisms. In this way;

  • Curtain designs will be started considering the demands of the customers.
  • It is possible to send the designed curtains and include the assembly steps.
  • If the assembly is completed, their use will be possible.
  • It is also useful to check the mechanism from the chains only during the final checks.

Working Mechanism of Curtain Measurements


When it’s about measuring curtains, each mounting method offers a completely different aesthetic. The outdoor bracket is the most common type of mounting for hanging curtains. When the curtains are mounted outside, the rod is fixed to the wall outside the window frame. Although not very common, indoor mounted curtains are another mounting option that gives you a different look.

The inner bracket refers to a curtain rod that is inserted into the window frame and creates a slimmer look. Interior curtains don’t block out the light completely, but still offer plenty of privacy and a modern, minimalist look. It is better to choose the length of your curtain rod before measuring the width of your window. Curtain rods typically extend 3-6 inches beyond a window frame. However, as the rods can be mounted inside, below, or above the molding post, determining where to mount the rod will affect its length.



Hang curtains on the window frame for contoured and custom window treatments. For a perfect fit, opt for curtain rods with protective end caps and a flexible design. Window treatments for this modern look should only be slightly wider if you want a view as wide or creased as the inside of the window. If the top of the window frame has a beautiful crown shape, consider installing the curtain rod just below the cladding. It’s a great way to show off your form skills and add privacy and style to your windows.

The ideal location for a window bar really depends on how much space there is between the top of the window and the ceiling and the overall aesthetics you seek. Curtains can be hung 20 inches above the window frame for an elongated look. The longer and wider the curtain rod is placed, the larger the window will look. Next, you need to consider the style of interior decoration you want to achieve to determine the right length for your curtains. There are three ways to hang your curtains based on the style you prefer.



Curtains hanging from the edge are usually 1 cm above the window sill. This requires the curtains to end about six inches below the window. The length of the floor will depend on the style you prefer, but generally, you want your curtains to be 1 cm above the floor. The width of the curtains should generally be 1 1/2 to 3 times the final width of your window. However, the fullness you choose defines the style you want to ultimately achieve. Larger curtains will make your windows feel better, while shorter curtains will create a more personal look.

Note that window panes often appear as separate items. If curtains are supplied separately, double the specified width of the curtain panel. You can use a tablecloth or blanket to compare the exact size. The length you choose for your curtains ultimately depends on your hanging method and the look you want. Attach the tape measure to the top of the window frame or the upper inner corner and measure the desired length. For higher drape placement, measure from the top 20-inch window frame to create an elongated look.

How to Measure Curtains


If you want the curtains to make a statement, consider a full-length pair that reaches the floor, or even an extra-long length that falls to the floor later for a plush, luxurious look. Curtains are also available in different types of headboards for hanging in different ways. Grommet heads have large metal rings sewn onto the header and bolt directly to a curtain rod like tab heads. This allows the curtains to hang in long, even folds.

Tight pleats tie the fabric in groups and look more comfortable, while pencil pleats resemble pencils in a row. Wave heads have a smoother, more curved surface. All three can be suspended from a rail (or track) or a pole. Once you’ve decided on the effect you want, insert your rod or curtain rod. Whatever you choose, you have to hang it before you measure yourself on the curtains. The rail or post should be suspended about six inches above the window and six to eight inches wider on either side. If you want to create a sense of height in the room, hang the railing or place it a few inches.



Measure the length of the rail or bar to determine which one you need (between parts, not from the window, but from the ends) is the width of each curtain and means they have a beautiful, complete assembly even when closed. The fullness of the curtain creates a beautiful finish that is currently very desirable. Headboard types require varying degrees of padding, and a thin, sheer fabric means a thicker one to achieve a similar look. may require more fabric (more fullness) than the material.

If the curtain track has an overlap, add the overlap length to measure the track width. Measure the drop in the curtain rod, or if you have grommets or legged curtains, the top of the fabric pole. Measure from the top of the pole for pencil folds or pinches or wavy heads, measure from the top of the rail or under the loops on a pole, whatever look you want to achieve. Curtains with a sill length should end 1 cm above the sill. Below the sill, the curtains should be about 15 cm below the sill, and 1 cm above the floor.

If there is a radiator under the window, the curtains should be 2-3 cm above the radiator so that the fabric does not block the heat. When in doubt or if you want your curtains to fit your window perfectly, make an appointment for a professional installation. Correct measurements are even more important in custom curtains. Retailers like Hillarys and John Lewis offer this service.

Measurement Work to Choose and Hang Curtains


The first thing to know is that curtains are sold in “panels”. Curtain lining is made of a single piece of fabric. You should make sure you know how many curtain panels you buy. The number of panels you need will depend on the width of your window, your choice of curtain style, and the amount of fabric you want the window sills to have when you open the window. Most people prefer the look of two curtain panels.



Most windows can be closed with one or two curtains, but some require more. For the most part, the total width of all curtain panels should be twice the width of your window. This allows you to completely close the window with the curtains closed, and leave several piles of curtains (layers of fabric at the edges of the window) with the curtains open. One of the most important features of shade selection is light control. There are several options available, from creating a dark bedroom for a better night’s sleep with blackout curtains to creating an airy farmhouse feel with curtains.

Transparent shades provide filtering in low light conditions. Instead, they diffuse the sunlight and create an ethereal glow in your home. These curtains are a great option for rooms that don’t need a lot of sun protection. They can also be combined with more blackout curtains (filtering or reducing light) for rooms that require darkness or privacy at certain times and natural light at other times. Transparent curtains are a popular choice for bohemian and country-style homes. Instead of diffusing sunlight, light filter curtains block sunlight (but not all). With their semi-opacity, they provide additional privacy to the room. From translucent to almost dark filter curtains, they offer numerous options for creating a barrier between the outside and inside of your home.

Curtain Types and Measurement Works


Blackout curtains block almost all of the sunlight. This is a great way to create a dark, cavernous environment that is perfect for movie nights and deep sleep. Also, many blackout curtains suppress noise and act as a thermal barrier. Some curtains have a thermal layer that insulates your home. Thermal curtains filter the light so that they do not block 100% of the light, but they are more opaque than transparencies. With their insulation functions, they can potentially make your home more energy-efficient. Be sure to check the description of the curtain to make sure that the fabric contains a layer of heat insulation.

We recommend that the total width of your curtain panels be twice your window. For this reason, it is important to measure the window width correctly before purchasing curtains. Use a steel tape measure to accurately measure the width of your window. Measure just above your window and be sure to add a frame or siding. We recommend going once up, once in the middle, and once under the window. These measurements can vary. Record the largest of these measurements. To determine the overall width of your curtain panels, fold them in half.



The width of the window also determines the width of the curtain rod. We recommend that the curtain rod be ten inches wider than the width of the window. This will add five inches to each side of your window and minimize the amount of fabric covering your window when the curtains are open. If you don’t have enough wall space to add another 5 inches to each side of your window, consider cutting the curtain panel’s width in half. Use a curtain rod with a total width equal to the width of your windows and curtains (rather than two) equal to the width of your window. This way, you avoid covering your windows with too much fabric while the curtains are open. Another idea is to use a tie to open the curtains further.

Should your curtains touch the ground? Should they be close to the windowsill? The answer is: it’s up to you. There are four general options for choosing the curtain length. When you have made up your mind, take a steel tape measure. Place one end where you want the curtain rod to hang, maybe 4-6 inches above the edge of the window. Then measure the distance from where you want the curtains to fall to that point.

Curtains fall on the window sill. If your window does not have a sill, they will fall on the inside edge of the window frame. Always take your own measurements, but 63-inch curtains go with this style. It has a great length for informal areas like your kitchen. Curtains up to an apron fall directly under the window sill. You can measure from the height of the curtain rod to the window sill and then add 2-3 inches. We love to see this type of curtain length in bedrooms or bathrooms. This is the most common type of curtain length. You can easily measure the height of the curtain rod to the floor. This style gives everything a sophisticated and finished look. We love to see curtains on the floors of living rooms and dining rooms.



It is the most formal of all curtain lengths. To find the correct length of floor curtains, you need to measure the floor curtains. Then add at least 8-10 inches to create this puddle effect. We love this length for homes with traditional decor or homes with a formal living room. Of course, this style can be used in any home and adds a dramatic effect to any room. When it comes to your curtain style, all you have to do is think about color and pattern. One of the most distinctive features of a curtain is its “headline”.

Grippers are the top of a curtain. You determine how the curtain will hang from the curtain rod. Curtain heads also determine the diameter of the curtain rod. Be sure to check the curtain description to find out what size the curtain rod for the headboard. This is especially important for pocket mail headlines. The titles of the different colors are described below. Eyelet curtains have ties that slide along the curtain rod and form large pleats around the window. Pole pocket curtains have a sewn-in pocket that glides on the curtain rod.

Hanging Curtains After Measurement


Pleated curtains look very elegant and have pleats that remain even when the window is opened and closed. These curtains are usually hung with hooks behind the curtain panel in each fold. They are then attached to a crossbar so that they can be opened and closed smoothly. Flap-back curtains are the best option for those who want a clean look. Hidden protrusions behind each curtain panel create subtle folds while the curtain rod is hidden behind the fabric. In striped curtains, there are several fabric bottles above the curtain. Curtains are open folds in the fabric in which the curtain can slide, leaving beautiful gaps at the top of the panels.

Fringes are additions to the fabric at the top of a window. These properties are often used to add style or color and hide unattractive material. Once you have determined the number of curtain panels you will need, the width of your curtains, the length and height of the cornice, and the type of cornice used, it is time to hang your curtains. We recommend asking a friend for help, but you can do this yourself. Each type of curtain rod is slightly different, but most require you to install the brackets first. These brackets hold the post in place.



Please look at the line you created in your window (step 3) 4 to 6 inches (or the height you chose). Using this guide, create two more pencil marks of the same height five inches behind either side of your window. It is in these panels where the center of their support should be placed. Depending on how the brackets are attached to the wall, use the center markers to mark where you want the screws to go. Use a screwdriver (or drill) to secure the bracket to the wall and make sure their centers are aligned 4 to 6 inches above the window frame.

Use a level to make sure the top of the stand is level. Repeat this step until the hooks (if any) are positioned on both sides and in the middle of the window. Attach the curtains to the rod before removing it from the hanger. It is often helpful to have curtains in the middle so that you can slide the rod from one end of the brackets to the other. Once the curtain rod is attached to the brackets, place the ends or ends of the curtain rod to hold them in place. Another kind of curtain rod is attached directly to the window frame. This type of rod requires only a hammer and nails.

Since these won’t protrude five inches from the window frame, consider purchasing the same width as your window (including frames) rather than folding the curtains. You can forget about measuring with smart sticks. Use a screwdriver to place the brackets right next to the window frame. Place your curtains on the curtain rod and attach it to the brackets. These smart beams are pre-measured to rise five inches above the window frame.

Correct Curtain Measurement Techniques


The best appearance of the curtain in the wall and glass area will be with the measure you will take according to the curtain type. Many criteria, such as whether your curtain is blinds or a flat curtain, or a tie-in curtain, give you an idea of ​​how to measure. It will be sufficient to consider the centimeter overflow and take that size first. Secondly, the answer to the question of how to measure the curtain is how to measure the size of the curtain directly.

The area to be determined for this is to measure the length of the curtain from the cornice or directly from the ceiling. Since the production of roller blinds is made at least 200 cm, the curtain length can be obtained from the cornice or ceiling accordingly. Finally, in the measurement to be made, the dimensions for the windows with opening wings should be taken by centering the vertical records. The curtain size, which is technically important, will give you an idea of ​​how your curtain will look more or less before you get your curtain. It would be best to buy a curtain with this in mind.



If the steps given above are completed, you will act according to the answer to the question of how to calculate the curtain size. If each stage is acted meticulously, it will be ensured that the curtain size is completed without any problems. You can evaluate and have your curtain size taken. The most important detail in calculating the curtain size and what you need to pay attention to before taking the curtain size is whether the curtain you want to take will stand on the wall or directly in the glass part. It will be much easier to measure with the selected curtain model directly after the curtain is determined.

The fact that the sections opened for roller blinds will be produced in pieces requires you to inform that as well. For this reason, it is recommended to act according to the points to be considered in the curtain dimensions to be taken. If you act according to the answer to the question of how to calculate the size of the curtain, you will be able to determine the size according to your curtain type without any problems. Many options such as curtain length, curtain area, curtain-type, and curtain model will also provide convenience.

For this, you can directly choose the curtain models accordingly, and you will be able to provide both a useful and aesthetic appearance thanks to the curtain you will use correctly. Among the answers to the question of how to calculate the curtain size can be with the assignment of experts in this field to take measurements. Thanks to them, it is ensured that the measurements can be taken in a short time and the curtains can be used easily.

Windows Measurement Works for Curtains


Adding curtains can make a big difference in any window. However, finding out what size curtain you need is easier than saying. Measuring window dimensions can be a little tricky. Here are some tips to help you get the perfect measurements. Preparing for the installation of curtains requires a set of tools, both for measuring the size of the window and for installing the curtains. You will need the following tools: pencil and paper, metal tape measure, drill, screwdriver, screws, rod hangers, ladder, and rod hardware.

Knowing where to mount your shade gear is the first step to getting accurate measurements. Will it be mounted on the window frame so the curtains will spread across the window and not more or will you mount it on the wall outside the window frame? It has advantages and disadvantages for everyone; Inside mounted curtains attach great importance to the window itself, while curtains mounted on the outside are ideal if the window frame is not exactly square. The position of the curtain rod can change when installed outdoors. Typically it should be installed 3-4 inches above the top of the window frame. However, installing the curtain rod higher than the window can help make a small room bigger.



When measuring the width of your window, it’s important not to just take one measure and assume it’s correct. In most cases, the width of the window frame is not uniform from top to bottom. Therefore, you will need to take three measurements (one at the top, one in the middle, and one at the bottom) to get a more accurate number. If you are measuring inside the frame, choose the shortest (tightest) measurement. When measuring the outside of the frame, choose the longest (widest) measurement. Also, do not assume that you have to buy enough curtain material to cover the width of the window. To add “fullness” to your curtains, you should use more material than you expected.

Decide if you want a full or complete look. There are several ways to measure the length of the window depending on how long you want the curtains to go. Options include measurement from curtain rod to window sill, slightly below the sill or to the floor. If you’re measuring on the floor, you can also add a few inches to your measurement so that the bottom of the curtains falls above the floor. This is called a “puddle” and can range from an inch or two of extra material to a full foot of material thrown into the ground.

Also, the type of material used can affect the way you take your measurements. If you use curtain rings on the rod, their size will determine how far the curtains will hang from the rod. You want to make measurements on the rings rather than the bar itself. If you are installing the curtain rod outside the window frame, you may want to add a few inches to the window frame size so the curtain rod loses the width of the window with room to cover. Both sides. If your curtain rod has end caps, you will also need to consider their length to make sure there is room for the rod and caps on the wall. With these steps, you should be on your way to getting the perfect size for your curtains.

Best Curtain Rods That You Can Buy Online












Savaş Ateş

I like home decoration. I have a good interest in carpets and curtains. I have visited a lot of manufacturers and stores. I have lots of friends in this area. I like to share my experiences with it.

Recent Posts