Curtain Dimensions: How to Measure and Choose Correct Curtain

The expansion of shades can have a major effect on any window, however, making sense of the size of the curtains you need is quite difficult. Estimating windows for drapes can be somewhat dubious, so here are a few rules to assist you with making the ideal estimations. In this article, we will share the details of mesaurement of curtains and how to choose correct curtains for your home.

What Tools Do You Need to Measure?

Getting ready to introduce draperies requires various instruments, both for estimating the window size and for introducing the blinds. You’ll need to have the accompanying instruments close by:

For estimating:

• Pencil and paper

• Metal estimating tape

For introducing shades:

• Electric drill

• Screwdriver

• Screws

• Brackets to hang pole

• Step stepping stool

• Rod equipment

Where to Mount the Hardware

Realizing where you’re going to mount the drapery equipment is the initial step to making exact estimations. Will it be mounted inside the window outline, with the goal that the blinds range the window and that’s it, or will you mount on the divider outside the window outline? There are points of interest and weaknesses to each; inside-mounted drapes place an extraordinary accentuation on the window itself, while outside-mounted blinds are perfect if the window outline isn’t entirely square.

For an outside mount, the curtain bar arrangement can shift. By and large, it ought to be introduced 3 to 4 crawls over the head of the window outline. In any case, introducing the curtain pole farther over the window can help make a little room look greater.

How to Measure the Dimensions of Curtains

When estimating the width of your window, it’s significant not to take only one estimation and accept that it’s right. As a rule, the window outline width isn’t level from the top to the base. Therefore, you should take three estimations (one at the best, one in the center, and one at the base) to get a more precise number. In case you’re estimating within the casing, pick the most limited (tightest) estimation; in case you’re estimating the outside of the edge, pick the longest (largest) estimation.

Additionally, don’t expect that you should buy simply enough blind material to traverse the width of the window. To offer “completion” to your shades, you’ll need to utilize significantly more material than you may anticipate. Choose if you need a full or full appearance. Take your width estimation (suppose 40 inches) and either twofold it or triple it (for a full look), implying that you would buy 80 inches or 120 creeps of all outboard material for the window ornaments.

To Measure Length

  • A one next to the other of blinds hanging over a window
  • When you know where you need to put your curtain equipment, it’s important to make sense of your Rod to Floor Height:
  • Imprint the spot where you might want to hang the curtain bar.
  • Measure the least spot that you might want the texture to hang (either the floor or the base of the window). This number is your Rod to Floor Height.
  • You will require Rod to Floor Height estimations to arrange your curtains, yet you despite everything need to trust that your curtains will show up before hanging your equipment.

There are a few different ways to quantify the length of the window also, contingent upon how low you need the blinds to expand. Choices incorporate estimating from the curtain pole to the window ledge, to a little underneath the ledge, or right to the floor. When estimating to the floor, you can likewise add a couple of creeps to your estimation to permit the base of the draperies to wrap on the floor. This is designated “puddling” and can go from only an inch or two of additional material to a full foot of material following on the floor.

What’s more, the kind of equipment that you use can influence how you make your estimations. If you will utilize curtain rings on the bar, their size will decide how far the window ornaments swing from the bar. You need to gauge from the rings as opposed to the pole itself. To help affirm that your estimations are right, you should quantify the length in three spots (down the left side, down the center, and the correct side), similarly as you did when estimating the width, this time utilizing the longest length.

Measure the length of the window or zone you need to cover through and through. Generally, window ornament length, anyplace from the ledge to the cover or the floor is an individual inclination and need not be precise. By moving your pole up or down a little you can alter the situation of the shade at your window. On the off chance that ledge length is wanted, just beneath the base of the ledge is right.

Other hanging styles acquire the shade to the floor request to “puddle” There are such huge numbers of sorts of window medicines to look over: Valances, shades, blinds, screens— – and so on! In any case, today, we’re discussing one of the most mainstream choices, shades. In any case, picking an inappropriate blind length can genuinely wreck your space. Like being told there’s a wonderful sweet bar at a gathering and discovering upon appearance it’s all veggies. So deceptive!

Standard Curtain Lengths

You can discover window ornaments in a couple of standard lengths:

  • 63 inches
  • 84 inches
  • 94 inches
  • 108 inches
  • 120 inches

This doesn’t mean these are the main window ornament lengths, it’s exactly what you’re probably going to discover on the web and in-stores instant.

To Measure Width

  • Add 12 crawls to each side, 24 inches complete.
  • Take the all outnumber (width in addition to the number you added to each side), and separation that number by what number of curtain boards you need in the window.
  • Ensure the number of custom curtain boards you request can cover the whole region you need to be secured (all-out width isolated by boards).
  • Model: For a 60-inch window with two drape boards, add 24 crawls to 60 inches (window width) and partition by 2 (number of boards) to get 42 inches. The two boards requested each should be in any event 42 inches wide.

On most draperies and window medicines, it takes a few times more material/blind to give the best possible completion in appearance when introduced/holding a tight pole than the real window width. Measure the width of the pole from left to right. A typical standard for showing blinds appropriately says the shades completed width ought to be at any rate multiple times the width of your window (if not more – sheers can be multiple times the window width) to accomplish a look of legitimate totality.

For this situation, 2 boards will give around 100″ to 120″ of width which will look overall quite full. Continuously gather together to the following full number. Since you’ve picked how you need your window ornaments to hang, it’s an ideal opportunity to think about the width, which is similarly as significant! Window ornaments that aren’t wide enough won’t affect. As a rule, more full shades approach a more emotional look. No one needs weak window ornaments, correct? Here’s how to figure precisely how wide should your draperies be: Measure the width of the window and increase this by 1.5 to multiple times.

Regular Fullness multipliers (increase your deliberate width by):

  • Standard completion increase by 2
  • Luxurious Fullness increase 2.5
  • Ultra completion increase by 3

Before you figure out how to gauge your blind’s width, figure out what sort of curtain style you need for your windows. Regardless of whether you need enriching boards along the edge of your window or shades that spread your window, will decide what number of curtain boards you pick. The texture you decide for custom curtains will accompany the fitting completion; just request the specific width that you need your curtains to cover.

Sideboards are styles of curtains that are not intended to close and hang along the edges of your window for embellishment. For sideboards, measure how much width you need your boards to cover, and request that width. Sideboards can likewise be crumpled to cover less space when wanted. On the off chance that you need your curtains to cover the whole window, you will require enough board width to hang over the full opening.

How Long the Drapery Rod Should Be

In case you’re mounting the curtain bar outside of your window outline, you’ll likely need to add a couple of crawls to the estimation of the window outline so the curtain bar traverses the window width, with space to save on each side. Likewise, if your curtain bar will have finials on the finishes, make certain to factor in their length also to ensure that there will be room on your divider for the bar and the finials. By remembering these means, you ought to be well en route to accomplishing ideal estimations for your window ornaments.

Drapery or Valance Sizes

The width of pole pocket window ornaments is expressed as the level out width. You could never utilize the drape level out so remember that a 60″ wide board won’t look great on the off chance that you attempt to cover a 60″ window with it. You have to give completion by utilizing various boards for a window that size. Certain things are utilized “level out” or near it and we will express that in the item depiction.

Squeeze creased wraps then again have the completion sewn in. So a couple of 48″ wide window hangings can cover 48″. You have to factor in the covers which we normally consider as 12″ (focus region where the left and the right board should cover each other when shut) and restores (the “fold-over” part which comes back from the essence of the bar to the divider) so a 48″ squeeze crease pair truly covers around 36″ of the region.

Snatch your trusty estimating tape and take your estimations from the floor to where the bar will be set.

Star tip: To cause your windows to seem more extensive and higher (as you should) add a couple of creeps to your estimations. You can go as high as a couple of crawls to the roof for the greatest stature and show.

This may mean you’re traverse into custom curtains an area, contingent upon your space. If your shade bar is excessively low, it’ll shrivel your window size and this is unquestionably something you don’t need. Still uncertain? A standard general guideline is around 4″ up from the head of the window however you can go up from that point.

Types of Curtains and Their Dimensions

Window Sill Curtains: These drapes end directly at the window ledge. This is fitting in places like a kitchen where the window is raised.

Cover Curtains: Apron drapes descend around 4″ from the window ledge. They’re likewise best in easygoing spots like a morning meal alcove or on the off chance that you have a radiator under the window.

Floor-Length Curtains: Exactly how it sounds, this length hits the floor and doesn’t transcend it. (High-water draperies, much the same as jeans, are an unmistakable no-no). This is one of the most widely recognized decisions, particularly for lounges. Furthermore, they’re one of the simplest to keep up and to open and close.

Shades that Puddle: Window medicines that “puddle” at the ground, for the most part, stretch out around 1-3 inches onto the floor. The outcome is more of a sensational look, regularly utilized informal spaces like lounge areas.

There are such a significant number of dazzling drape bars and styles to look over! This will likewise have any kind of effect on how the blinds feel in the room. Remember, blinds that puddle is more high-upkeep since they’ll gather residue and creature dander on the off chance that you have to hide children. They’re additionally more hard to open and close, so you’ll need to remember usefulness if considering these.

Do’s and Don’ts While Deciding the Dimensions of Curtains

  • Try not to hang the window ornaments excessively low
  • Do drape your blinds, at any rate, a couple of crawls over the windows
  • Try not to pick excessively thin draperies
  • Do pick a shaded pole that is more extensive than your window
  • Try not to hang the shaded pole inside the window outline
  • Do combine your window ornaments with blinds on the off chance that you need more inclusion
  • Do guarantee your draperies are sufficiently wide so they are full when open and shut.
  • Try not to hang excessively short window ornaments; for floor-length, they should skim the ground.

Valance style curtains can cause a window to seem taller, and are suggested for outside mounts. Pick a length from 10-30 inches. For a ledge style shade, request for a length that will end 3/8 creeps over the window ledge. We suggest ledge style curtains for outside mounts, or for windows that have ledges that reach out past the window opening. Bistro style curtains are suggested for both inside mount or outside mount and are frequently utilized in kitchens. For a bistro-style, pick a length that will balance 6 crawls beneath the base of the window, or 3/8 creeps over the window ledge. It is ideal to put the curtain equipment around the center of the window for this style.

To Choose Perfect Curtains for Your Home

Next, select a bar from which you will hang your curtains. It’s imperative to take note that your bar width excludes finials and sections. As much as possible be added to each side of your pole because of finials and sections. View your finial alternatives to locate the specific estimation. Derivations will be made to guarantee that your bar and finials are the widths of your request. Your curtains won’t reach out past your sections. Drapery Lengths, Curtains Size, and Curtains Width are important.

In the rundown down underneath you can see drapes width and shade length of the window drapery items in inches. Width is indicated either for one (single) board or two boards because specific window blinds are sold as a couple. A portion of the estimations identify with possibly a couple of boards; Pinch Pleated Thermal Curtains have two boards, while Patio Door Drape of a similar size has just one board.

If you experience issues finding the size of the shade you need to know that there is an approach to expand the width of a drape item by putting extra boards in a similar window. If your window/entryway is smaller, at that point the draperies width, you may broaden your blind pole a couple of inches father past the initial you are covering. If your window isn’t as tall as drapes, you may raise your pole a tad.

Cover styles are suggested for outside mounted windows and should wrap around 4-6 crawls beneath your window ledge or the base of your window. For floor style curtain, the length should stop 3/8 crawls over your floor. We suggest this style for any curtain that may be worked habitually and is most ordinarily utilized with an outside mount.

The compass, brushing or sleeve length curtain style is regularly utilized for outside mount windows and is valuable when your room requires definite mounting, for example, a roof mounts that window hangings to the floor. For this, we suggest a length that is 1-3 inches longer than your Rod to Floor estimation. Pooling or puddling style curtains are utilized in outside mounts when you need to conceal a lopsided floor or add some additional style to your look. We suggest this style if you don’t open or close them routinely. For this style, include a length of 6-12 crawls to your Rod to Floor estimation.

Significant: To appropriately quantify the size of the shade, they must be extended. In the window the shades don’t hang extended, that is the reason their width and length are somewhat littler than the recorded estimation.

Finding The Curtains You Need

The width you see recorded in every one of our window ornament item name and portrayal is the “generally speaking” width estimation of the thing laying level and extended. This width estimation isn’t the genuine width of a window that it will oblige, but instead the general estimation of the blind thing laying level and extended.

For the Tap top, Grommet Top and Rod Pocket shades it takes at any rate 1.5 to times more material or blind width than the real window width to give the correct inclusion of the window and look when draperies are introduced or holding tight a pole. To help you in your choice procedure, we give data in the depiction of each drapery item concerning “what size window each blind item will cover”.

Other data you may require: At the point when a vacant drape bar is introduced in your window, measure the width of the bar from one end to the next. Ordinarily, Grommet, Tab, and Pole top shades are shown (aside from squeeze creased wraps) when the draperies width is at any rate 1.5 (least) or multiple times (greatest) the width of your window. For this situation, you can accomplish an appropriate look of your shades.

Suppose your window is 50″ wide for instance. The base tab top/pole pocket blinds width you need is 75″ (window width x 1.5 = least width required) and the most extreme width you need is 150″ (window width x 3 = greatest width required). In this way, you will require a shade (drape pair or blind set with a valance in the middle of) with a width somewhere close to 75 and 150 crawls to appropriately oblige the width of your window and to accomplish the legitimate appearance. A couple of inches distinction doesn’t make a difference.

The length of the tab top shades is estimated by and large. You have to remember that if you don’t need the window to show/sparkle over the tab top blinds through the tabs, so you have to mount your enriching pole like at least 4 creeps over the window space and add these additional crawls to your determined length.

Picking a Hardware Location

In the first place, pick the spot where you’d like your curtain to hang. Your curtain length will rely upon where you need the curtain bar to be set. For an outside mount, the custom curtains loom over and around the windows. For an in vogue look that shows a greater amount of the window when the shades are open, and cause the window to appear to be bigger when the curtains are shut, follow the accompanying tips:

  • If you have space, place the pole 8 creeps over the window.
  • Have the pole expand 12 creeps on each side of the window, 24 inches all out.
  • For an inside mount, the curtains are hung within your window opening. On account of an inside mount, keep the equipment as near the window outline as could be expected under the circumstances. Follow the accompanying tips:
  • Check your estimations to ensure the shades fit inside the window opening, as they won’t have the option to stretch out past the window.
  • Since the texture begins at the head of your bar, start your estimation from the head of the pole and allude to bar directions for precise, full-length curtains.

Other Factors Should Be Measured While Choosing Curtains

It would be ideal if you remember: to gauge the size of a drape effectively, the blind must be STRETCHED. In the window the curtains don’t hang extended, that is the reason their width and length are somewhat littler than the recorded estimation. At the point when an unfilled blind pole is introduced on your window, measure the length from the head of the shaded pole down to the top edge of the window stool or where you need the base of the drape to hang.

For instance; if the length you estimated is 62.5″, you would regularly require a 63″ long window ornament. Blinds are made to fit these regular window lengths/tallness: 45″, 54″, 63″, 72″, 84″, 95″, 96″ and 108″ tall. If your window length falls in the middle of these sizes, you could utilize drapes that are somewhat more or somewhat shorter, contingent upon the ideal appearance. For instance; if your window is 59″ long, you may utilize a 63″ long drape (hanging 4 inches longer beneath your window stool), or a 54″ long (having a 5-inch space over your window stool, not exactly arriving at it).

You could likewise move your shade bar higher or lower to oblige for the distinction in lengths if conceivable, or request a more drawn out window ornament and trim it yourself or request Shorter Length draperies. We have this choice accessible for 3 styles just – Crosby, Cornwall, and Fireside. On the off chance that you pick Weathermate, Trellis style drapes, their texture recoils after being washed in chilly water and line dry (NO drier). Shrinkage is 1-2% in width and length.

Grommet Top Curtains Width Measurement

Grommet boards have the most extreme width they can stretch to, which is about 20% less than their real width! It happens because of grommets on the barkeep the drapes from extending completely. The greatest width is referenced on each Grommet item depiction page.

Squeeze Pleated Pair of Drapes Width Measurements

Creased window medicines don’t have bar pockets, so they don’t get accumulated on a drape bar. The width of those is estimated at the top, where the creases are. On the off chance that you utilize embellishing round pole with rings, the width of your window curtain bar is about the width of the draperies you would require. You might need to include a couple of additional creeps for the curtains to reach past the window width for better protection and look.

On the off chance that you need to utilize a crossbar, at that point you will need the curtains to cover in the center and spread the closures (fold over the pole’s corners), you should include additional width depending on the separation your bar is situated away from the divider. Suppose the bar is 4 inches from the divider; at that point, you should add additional 8 crawls to your estimations (4 creeps on each side of the bar) in addition to the ideal size of the cover (2-4 inches). For this situation, the additional width you have to add to your window hangings width is 10-14 inches. If your window if 106 inches wide, the width of the curtains you need is 114″- 120″ wide.

On the off chance that your navigation bar is situated 6 inches from the divider, you should include additional 12 inches (6 creeps on each side of the pole) in addition to the favored size of the cover in the center (2-4 inches), which will make absolute extra required width 14-16 inches. In this way, if your window if 106″ wide, the width of the curtains you need is 120-124 inches wide.

Porch Door Drapes Width Measurements

If you are looking for yard entryway wraps (for sliding glass entryways), standard width of the entryway is 96″ wide, and standard porch entryway curtain board width is 96″ wide as well. Be that as it may, it is likewise fitting to have some additional width, more extensive than the real width of your door jamb. With navigate bars, which open and close with a drawstring, you may need the curtain board to pull totally out of the way of the entryway to permit utilizing that entryway without the wrap meddling with its capacity. We have a Custom Width alternative for 3 window hangings styles – Crosby, Fireside, and Cornwall.

On the off chance that you utilize improving round bar with rings and clasps, the width of your porch entryway/or curtain bar is about the width of the yard wrap you would require. You may include a few additional creeps for the wrap to reach past your entryway width for better protection and look. On the off chance that you need the wrap to be totally off the beaten path when it is open you need additional 6-12 creeps to carry out the responsibility. Along these lines, if your yard entryway is 74″ wide, the insignificant width of the wrap you need is 80-86 inches wide.

On the off chance that you need to utilize a crossbar, at that point you will need the wrap to cover the finish of the pole (fold-over its corner). This will require in any event 3-6 creeps of additional width relying upon the separation your pole is situated away from the divider. On the off chance that the bar is 3 inches from the divider, at that point you should add 3 creeps to your estimation. If your navigation bar is situated 6 inches from the divider, at that point you should include additional 6 inches each side of the bar to fold over pole’s corner, which will make all-out additional width 6 inches. Thus, if your yard entryway is 86″ wide, the insignificant width of the wrap you need is 89-94 inches wide.

Squeeze Pleated Drapes and Patio Door Drapes Length Measurements

If a navigating bar has been now introduced on your windows or yard entryway, measure its length from one inch over the pole. It will give you the inexact length you need. If you have a beautifying round pole, you need to utilize rings with cuts, which could be 2″ – 4″ in size. You will require to incorporate their size to the estimation. For instance, if your round bar is situated 87″ from the floor, and the rings with cuts are 3 inches, you will require the length of the wrap 84″ long to contact the floor, or somewhat shorter to be over the floor.

Bonus: 3 Amazon Curtains

Piper Classics Farmhouse Stripe Gray Panel Curtains, Panels w/Attached Valance & Button Accents, Long Drapes

Price: $120. Buy on Amazon.

  • 100% Cotton
  • A Piper Classics Original. Planned by Available Exclusively from Piper Classics.
  • Woven charcoal dim ticking stripe on an antique white base; Attached valance in the same texture, complemented with 5 wooden catches along base texture strip; Lined with white cotton. Incorporates 2 coordinating tie backs.
  • Machine wash in chilly water with like hues, delicate cycle. No chlorine dye. Hang to dry if conceivable, or tumble dry low and expel quickly. Iron if necessary.
  • A genuine exemplary, ticking stripe texture stays new and exceptional, planning easily with other texture assortments for nice current farmhouse style stylistic layout. Make certain to see the entirety of the ticking stripe arrange accessible from Piper Classics!

Lush Decor Navy and White Tanisha Curtains Room Darkening Floral Vine Print Design Window Panel Set (Pair), 95″ x 52″

Price: $100. Buy on Amazon.

  • 100% Polyester
  • Quieting wonderful beautifying plan with falling blossoms and a flower trim at the base of each board
  • Room obscuring window blinds channel a bit of light and warmth, however, take into account some normal light to come through
  • 100% polyester window blind boards with a botanical structure Curtains are not lined and have a 3″ bar pocket each board measure 95 x 52 crawls with a 2″ header
  • Rich Décor Tanisha drapes include a fragile plant-like structure for your customary or nation style room lounge or lounge area windows
  • Simple to think about and safe to machine wash cold in a work clothing pack delicate cycle and tumble dry low

Melodieux Set of 2 Pom Pom Velvet Blackout Lined Thermal Insulated Rod Pocket Curtains for Bedroom, 52×84 Inch, Royal Blue (1 Pair)

Price: $130. Buy on Amazon.

  • One of a kind Design: Soft textures with extravagance tufts, beige covering on back assistance shut out daylight
  • Bundle Contents: 2 of 52″W x 84″L Curtain Drapes (1 Right and 1 Left) + 2 Matching Tie Back
  • Capacity: Reduce 99% of daylight, shut out 99% of UV beams, give 100% protection, diminish outside clamor, protected warmth and cold
  • Pole Pocket Top: Constructed with 3″ pole pocket, 1″ header fix, slips easily over your norm or beautifying window ornament bar for snappy, device-free establishment
  • Care Instruction: Machine washes with clothing pack or launder. Tumble dry low. Try not to fade

Savaş Ateş

I like home decoration. I have a good interest in carpets and curtains. I have visited a lot of manufacturers and stores. I have lots of friends in this area. I like to share my experiences with it.

Recent Posts